Contact Information, Site Terms and Conditions, Privacy Policy

Mailing Address

600 West Foothill Blvd.
Glendora, CA, 91741

Phone Numbers

Local: 626-335-1263
Fax: 626-963-1912


Privacy Policy Statement

For each visitor to our Web page, our Web server automatically recognizes only the consumer’s domain name, but not the e-mail address (where possible).

We collect only the domain name, but not the e-mail address of visitors to our Web page, user-specific information on what pages consumers access or visit.

The information we collect is used to improve the content of our Web page.

With respect to cookies: We use cookies to record user-specific information on what pages users access or visit.

If you do not want to receive e-mail from us in the future, please let us know by sending us e-mail at the above address.

Persons who supply us with their telephone numbers on-line will only receive telephone contact from us with information regarding orders they have placed on-line.

Please provide us with your name and phone number. We will be sure your name is removed from the list we share with other organizations From time to time, we may use customer information for new, unanticipated uses not previously disclosed in our privacy notice. If our information practices change at some time in the future we will post the policy changes to our Web site to notify you of these changes and provide you with the ability to opt out of these new uses. If you are concerned about how your information is used, you should check back at our Web site periodically.

Customers may prevent their information from being used for purposes other than those for which it was originally collected by e-mailing us at the above address.

Upon request we provide site visitors with access to a description of information that we maintain about them.

Consumers can access this information by e-mail us at the above address.

Upon request we offer visitors the ability to have inaccuracies corrected in contact information.

Consumers can have this information corrected by sending us e-mail at the above address.

With respect to security: When we transfer and receive certain types of sensitive information such as financial or health information, we redirect visitors to a secure server and will notify visitors through a pop-up screen on our site.

If you feel that this site is not following its stated information policy, you may contact us at the above addresses or phone number.


 

Site Terms and Conditions

www.hallmarkmetals.com grants you a limited license to access and make personal use of this site and not to download (other than page caching) or modify it, or any portion of it, except with express written consent of www.hallmarkmetals.com. This license does not include any resale or commercial use of this site or its contents; any collection and use of any product listings, descriptions, or prices; any derivative use of this site or its contents; any downloading or copying of account information for the benefit of another merchant; or any use of data mining, robots, or similar data gathering and extraction tools. This site or any portion of this site may not be reproduced, duplicated, copied, sold, resold, visited, or otherwise exploited for any purpose, commercial or otherwise, without express written consent from www.hallmarkmetals.com. You may not frame or utilize framing techniques to enclose any trademark, logo, or other proprietary information (including images, text, page layout, or form) of www.hallmarkmetals.com and our affiliates without express written consent. You may not use any meta tags or any other “hidden text” utilizing www.hallmarkmetals.com’s name or trademarks without the express written consent of www.hallmarkmetals.com. Any unauthorized use terminates the permission or license granted by www.hallmarkmetals.com. You are granted a limited, revocable, and nonexclusive right to create a hyperlink to the home page of www.hallmarkmetals.com so long as the link does not portray www.hallmarkmetals.com, its affiliates, or their products or services in a false, misleading, derogatory, or otherwise offensive manner. You may not use any www.hallmarkmetals.com logo or other proprietary graphic or trademark as part of the link without express written permission.

Company News

11/11/2014: Hallmark Metals would like to thank all the service men and women who fight for our freedom.  We appreciate all of your sacrifice and what you do for our country and all of us!

10/08/2014: Hallmark Metals is excited to have our new Falcon Waterfree urinals installed and in use going forward.  We look forward to reducing our impact on the environment.

10/03/2014: Hallmark Metals is excited to continue our efforts on water conservation by replacing and updating our facility with Falcon Waterfree urinals in our restrooms.  These will be installed in the second week of October.

08/29/2014: Hallmark Metals is pleased to announce we passed our Honeywell Self Release audit.

08/07/2014: Hallmark Metals is proud to announce we passed our annual ISO surveillance audit with no findings.

08/01/2014: Hallmark Metals is continuously looking for ways to help conserve water especially during California’s current drought situation.  All employee’s have been trained and are looking for ways to improve our water consumption.

07/04/2014: Hallmark Metals appreciates all our service men and women including their families and would like to thank you all for our freedom you provide us.

05/01/2014: Hallmark Metals is a proud US manufacturing company and strives to provide the highest level of service and quality.

03/11/2014: Hallmark Metals is proud to announce we passed our annual NADCAP Welding surveillance audit.  We are very proud of our team on this accomplishment and look forward to offering our fabrication and welding services to provide a winning solution to our existing or a new potential customer.

12/15/2013: Hallmark Metals would like to wish you all a very Happy and Safe Holiday Season!  We look forward to supporting any Precision Sheet Metal, Machining, or Assembly requirements you might have as we move forward into 2014.

11/09/2013: Hallmark Metals would like to thank all the service men and women who fight for our freedom.  We appreciate all that you do for our country and us!

10/14/2013: Hallmark Metals really saw great performance and output of our solar panels during the summer months and look forward to adding more of them in the future with our goal of being more innovative towards a greener environment.

08/13/2013: Hallmark Metals is proud to announce we passed our annual ISO surveillance audit with no findings.

07/21/13: Hallmark Metals is having great results with our Solar Panel System.  We have been producing more power than we consume on our larger building which is a direct benefit to the company as well as the impact we have on the environment.

02/23/13: Hallmark Metals is very excited to announce that through the installation of a 70 kW Solar Panel System in December 2012,  we have reduced our cost of electricity as well as our footprint on the environment.

12/15/12: Hallmark Metals and our entire team would like to wish all of our customers and vendors a very Merry Christmas and Happy New Years.  We thank you and look forward to our continued teaming efforts!

10/01/2012: In the efforts of continous improvement and in meeting our ISO commitments, Hallmark Metals has renovated our conference room by adding LED lighting which will directly contribute to the company goal of saving energy and creating a greener environment.  These efforts have simultaneously provided an improved atmosphere when meeting with our customers and also our own internal training.

09/04/2012: Hallmark Metals is proud to announce we passed our 3 year ISO re-certification Audit.

07/10/2012: Hallmark Metals is proud to announce it has teamed with the services of Sergeant Shredder for recycling.  The facts that made this an easy decision are they use the highest standard of security in the document destruction industry and recycle 100% of all shredded materials.  We believe that this is truly another big step in our effort to reduce our environmental footprint.

05/23/2012: Hallmark Metals passed our annual NADCAP Welding surveillance audit.

04/15/2012: Hallmark Metals is excited and would like to congratulate our Quality Manager Robert Corbett for passing the Honeywell SCA test for welding.  Our additionally certified personnel allows us to ensure we remain on the Honeywell APSL for this process.

03/30/2012: Hallmark Metals believes and welcomes an open line of communication with our customers and vendors.  This effort to listen and understand our customers’ requirements truly does create cost saving opportunities while improving throughput.

03/01/2012: Hallmark Metals is excited to continue to look for more “green improvements” that be done to our facility this year.

01/17/2012: Hallmark Metals has added an EZ-Cut Nitrogen producing machine for our laser machine which allows us the ability to reduce the cost to run parts while remaining extremely efficient.  We took delivery of this machine end of last month and it has been up and and in use since then.  Please allow us the opportunity to quote on your Sheet Metal and Machining requirements.  We look forward to teaming with you and getting your parts running at our facility in the new future.

12/01/2011: Hallmark Metals is excited to announce we have upgraded our CNC Turret Press to a much more energy and cost efficient machine that is now up and running.  Our customers will experience improved cost through this while our environmental impact is reduced as well.

11/11/2011: Hallmark Metals is excited to announce we have upgraded to (4) new energy efficient welding stations which will directly improve cost, efficiency, and impact on environment.

10/01/2011: Hallmark Metals has career opportunities posted and wants you to visit our job postings to learn more about them.

08/30/2011: Hallmark Metals is pleased to announce we passed our annual ISO surveillance Audit.

08/16/2011: Hallmark Metals is pleased to announce we passed our Honeywell Self Release Audit.

07/12/2011: Hallmark Metals has had many inquiries over the years in Spanish and we would like to announce that we are able to converse in Spanish where required.

06/15/2011: Hallmark Metals is excited about the new career opportunities it has posted.

05/11/2011: Hallmark Metals passed our first annual NADCAP Welding surveillance audit with no findings.

05/01/2011: Hallmark Metals will be announcing the debut of our new website by the end of this month.

01/15/2011: Hallmark Metals purchased Bobcad CAD/CAM software for programming our CNC machining and lathe equipment.

09/14/2010: Hallmark Metals passed our first annual ISO 9001:2008 surveillance audit.

05/05/2010: Hallmark Metals became Nadcap certified in Welding.

09/14/2009: Hallmark Metals earned our ISO 9001:2008 Certification.

05/15/2009: Hallmark Metals successfully completed certification to become a Source Certifying Agent for Honeywell in Fusion Welding.

12/01/2008: Hallmark Metals added a Haas CNC Lathe with auto loader to our production equipment.  Please call us for more info.

09/01/2008: Hallmark Metals added an Amada Pulsar Laser and 6 tier auto loading to our production equipment.  Capabilities are: Aluminum – .250″ thick, Stainless Steel – .375″ thick, Steel – .500″ thick.  Please call us for more info.

08/15/2008: Hallmark Metals upgraded to a new Janda Spotwelder with our plan to be able to handle Aluminum material as well.

08/01/2008: Hallmark Metals completely re-arranged our production equipment and material system to allow us to provide a much more fluent flow through our production environment.

02/01/2007: Hallmark Metals started a customer referral program.  Please call us for more info.

05/15/2003: Hallmark Metals added Jobboss software to cover our full production planning and tracking while including full accounting as well.  This software will be of great value in the future and allow us to be the most efficient we can be with our focus being to improve our throughput to our valued customers while improving our Quality and always considering time and cost as being key factors.

View All The Company News